Ritemps refrigeration panels are manufactured utilizing 26 gauge stucco embossed G 90 galvanized sheet metal. The galvanized A525 skin complies with ASTM A653 CS Type A specifications.
The core is factory foamed in-place urethane manufactured by BASF, and is Class 1 Autofroth . It is identified as 100-B1103 Resin/9300A Isocyanate. The panel core material has a density of 2.3 pcf with minimum self-ignition and flash-ignition temperatures of 430°and 445°.The panels are fabricated in thickness of 4 inches and a maximum width of 48”.
Flame Spread and smoke Development ratings per ASTM E84 are 0 and 70 respectively.
The panels are approved as load-bearing walls and ceiling panels for use in interior non-fire rated walk-in coolers and freezers.
Ritemps refrigeration Panels Standard of wall, ceiling, and floor panels feature tongue and groove construction with tongue of one panel fitting inside the groove of another, creating the most dependable seal. The tongue edge panel is provided with NSF listed gasket to help and provide an air-tight joint.
The standard wall and roof panel finish is stucco galvanized with numerous options in interior and exterior finishes to match your design scheme or durability requirements. The standard floor finish, when required, is Smooth aluminum. Multi-compartment walk-ins, are available as fully floorless, or with floor. L-shaped glass front walk-ins are also available. Floor angles will be provided to attach the wall panels to a concrete slab for floorless applications.
Ritemp’s panel construction is in compliance with ETL Intertek standards control #5002505, UL 471, NFS, and City of Los Angeles Research Report #: RR 26021
The Ritemp cam-locking system, together with tongue and groove construction and sealing gaskets, provides an accurate, tight fit between panels. When the wrench is turned the lock is engaged and a gradual seal and panel alignment occurs. Plug buttons are provided to cover each cam-lock access hole. Should the walk-in cooler need relocation, the cam lock process is easy to reserve. Panels can be taken apart easily as they are put together.
Ritemp warranty covers the original purchaser which has foamed –in place polyurethane wall & ceilings panels purchased from Ritemp are free from defects in material and workmanship for a period of Ten years from the date of receiving product.
Manufacturer is required under this warranty will be limited to replacing or repairing, at the company’s discretion. Panels that are confirmed to be defective within Ten years from the date product was purchased, FOB factory. Hardware and accessories carry a normal one year Warranty. The standard Warranty excludes any labor fees, for repair or replacement of defective parts.
Under no circumstances shall Ritemp be Liable to Purchaser, or any person, for any special consequential damages including, but not limited to, loss of product stored in Ritemp cooler or freezer, loss of profit, loss of use, and consequential damages including, but not limited to, food spoilage or product loss.
Ritemp specifically disclaims and no warranties, expressed or implied, as to the condition, design, usefulness, sufficiency, or capacity with respect to any standard, or non-standard item, including, without limitation, any warranty of merchantability or fitness of such product for a specific purpose or intended use.
This Warranty in place of all other warranties shown or implied and does not apply to product which has been subject to any alteration, accident, abuse, unauthorized service, misuse, improper installation by an unlicensed contractor.
Cost accumulated by installation, shipping servicing, handling or repair or replacement panels or parts. Maintenance, repairs, damage occurring in transit, delays or loss of property, income or profit. Floor panels shall be subjected to wet mopping, water leak, flood, pallet jacks or weight exceeding 700 lbs/ sq ft, refrigerant loss, damage by fire, flood, earthquake, and natural disaster.
Kason hardware is warranted for 1 year ( check website http://www.kasonind.com/index.php/applications/order/terms_and_conditions/ )
Anthony Glass Doors – check Intenational http://www.anthonyintl.com/Libraries/Service_Support_Documents/Anthony_-_Terms_and_Conditions_of_Sale_and_Warranties.sflb.ashx
Refrigeration Equipment-see manufacturer website